DIY: Charging cable coating fix
- Wool or thick yarn
- Plastic straw
- A charger that's falling apart
With all the use we get out of our phones and charging cables it's easy for every day wear and tear to take it's toll. Phones get dropped, screens get cracked and cables can split and fray and stop working.
We're going to show you a clever solution to wrapping your phone cable to stop it from fraying and breaking.
步驟 1: Materials needed
Scissors, a plastic straw, wool, or thick yarn. That's it!
You can choose any colour you like. It will not only repair the cable by covering the cable, but will also help yours stand out.
步驟 2: Repair the damaged part
First cut some parts from the plastic straw, long enough to cover the damaged part of the cable
步驟 3: Make it fit
If the straw is too thick, you can narrow it down slightly.
步驟 4: Repair
The plastic straw will prevent further damage to the split part of the cable. Of course, it can't undo the damage that's already done, but will stop it from getting worse.
步驟 5: Length of thread
We recommend you to leave as long as you can. Otherwise, the yarn may end in half. But of course it is possible to continue by adding.
步驟 6: Knot
Make a strong knot at the top to prevent the thread from slipping later.
步驟 7: Start wrapping
Wrap the thread along the entire cable (you might need a bit of patience for this part)
步驟 8: Here it is
Your new protected charging cable.